Moog MoogerFooger - Analog Delay
Product code: MOOMF104Z
Manufacturer: Moog

Moog MoogerFooger - Analog Delay Description

Moog MoogerFooger - Analog Delay

Overview

The MF-104Z soundz fantastic and like all Moogerfoogers it has controls that allow you to vary the sound in a variety of ways that you can only do with a Moogerfooger.

Features

DELAY TIME rotary control, which adjusts the delay time from slightly less than 50 milliseconds to 500 msec in the SHORT position; 100 msec to slightly more than 1000msec (1 second) in the LONG position.

MIX rotary control, which adjusts the mix between the direct and the delayed signals.

FEEDBACK rotary control, which adjusts the amount of delayed signal that is fed back to the input.

INT. LOOP-EXT. LOOP switch routes the feedback either directly or through an external effects processor that you hook up. For example, inserting the MF-102 Ring Modulator in the feedback loop will create echoes that change timbre as they die out.

DRIVE rotary control, which adjusts the gain of the audio input to the delay.

OUTPUT LEVEL rotary control, which balances the delayed signal with the bypassed signal.

LOOP GAIN rotary control, which sets the gain of the external feedback loop.

LEVEL, a three-color LED that is used to set the DRIVE control.

LOOP LEVEL, a LED that aids in setting the external loop level.

BYPASS, a two-color LED that tells whether the delay is active or bypassed.

ON/BYPASS, a rugged, smooth-acting 'stomp switch.'

Jack Panel Features

AUDIO IN 1/4" phone jack - accepts any instrument-level or line-level audio signal.

MIX OUT 1/4" phone jack - delivers the delayed and the direct signals, depending on the setting of the MIX control.

DELAY OUT 1/4" phone jack - delivers just the delayed signal.

TIME, MIX, FEEDBACK, all of which are stereo 1/4" jacks that accept moogerfooger EP1 (or equivalent) expression pedals, or control voltages from two-circuit or three-circuit 1/4" jacks.

LOOP IN - 1/4" phone jack - provides access to the feedback loop for connecting an external processor.

LOOP OUT 1/4" phone jack - provides access to the feedback loop for connecting an external processor.

+9V POWER INPUT jack - accepts standard 9 volt power adaptors (power adaptor included).

General Specifications

CASE: Black panel with hardwood sides - classic analog appearance.

DIMENSIONS: 9" x 6" x 2-1/2"

NET WEIGHT: 3 lb

SHIPPING WEIGHT: 5 lb, including power adaptor and instruction manual.

POWER REQUIREMENTS: 105-125 volt, 5W or 220 volt power adaptors available.